HDMI Quad-Output Splitter Ideal for Digital Signage in Schools and WorkplacesN/AThis 4K transmitter/splitter is recommended for video presentations in conference rooms schools trade shows meeting facilities houses of worship retail settings hotels and other digital signage applications where the source and display are farther apart than conventional A/V cables allow.N/AN/AExtends a 4K A/V Transmission up to 230 ft….or Even FartherN/AThe B127A-004-BH connects to Tripp Lite B127A-Series receivers to extend 4K signals from an HDMI source to four HDMI displays up to 230 feet (70.1 meters) away via user-supplied Cat6 cabling. By adding Tripp Lite B127A-010-H signal repeaters or B127A-110-BH transceivers (each sold separately) to the application you can extend the signal to each connected display up to 400 feet (121.9 meters) or 460 feet (140.2 meters) respectively.N/AN/ATransmits Crystal-Clear 4K Video with Multi-Channel Audio HDR and 4:4:4 ColorN/AThe B127A-004-BH supports Ultra HD resolutions up to 3840 x 2160 (4K x 2K) at 60 Hz with true uncompressed 7.1-channel digital audio and Dolby TrueHD. High Dynamic Range (HDR) provides a wide range of vibrant colors with richer contrast brighter whites and deeper blacks that pop on your 4K display. HDCP 2.2 compliance allows you to stream 4K Amazon and Netflix content with no complications. This splitter also supports 4:4:4 chroma subsampling for top-level PC gaming or using your HDTV as a PC monitor.N/AN/AMulti-Resolution Support Allows Mixing and Matching of Displays of Different ResolutionsN/ASay you have a brand new 4K/60 Hz HDTV in one room but want to also connect your Blu-ray player or satellite box to an older 1080p TV in another room. The B127A-004-BH is backward compatible with 4K/30 Hz and 1080p resolutions via automatic switching allowing each connected monitor to display video at its maximum resolution.N/AN/ALocal HDMI Port on Transmitter Supports 4K @ 60 Hz Resolution and Cascading N/ATo monitor the video signal being extended to the receiver connect a 4K display to the splitters local HDMI port with a user-supplied HDMI cable. This port does not support multi-resolution capabilities so the connected monitor must also support 4K/60 Hz to function properly. Add even more displays to an installation by connecting an additional B127A splitter unit (sold separately) to the port.N/AN/ABuilt-In PoC Technology Provides Receiver Power to Avoid Bulky External Power BricksN/APower over Cable (PoC) technology powers the connected receivers over Cat6 cable. LEDs indicate when the system is receiving power and a signal is being transmitted. PoC lets you avoid the hassle of a bulky power brick and gives you the freedom to place the receivers where needed without worrying about finding a nearby AC outlet.N/AN/APlug-and-Play Operation for Quick Setup and Immediate UseN/AThe splitter works right out of the package with no software required. Mounting hardware is included for installing it on a wall pole or 19-inch rack. Connect the splitter to an HDMI source device with a user-supplied HDMI cable (such as Tripp Lites P568- or P569-Series). Then connect the splitter to Tripp Lite B127A-Series remote receivers with user-supplied Cat6 cable (such as Tripp Lites N202-Series).N/AN/ATAA-Compliant for GSA Schedule PurchasesN/AThe B127A-004-BH is compliant with the Federal Trade Agreements Act (TAA) which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts.
